久久亚洲精品中文字幕,国产成人精品一区二区三区不卡,99久久人妻无码精品系列蜜桃,久久人人爽人人爽人人片

FR58L4HS-2020L

FR58L4HS-2020L

FR58L4HS-2020L is a high-performance 5.8G radar sensor FMCW ranging and presence sensing launched by Ferry Smart Intelligent. The radar module uses the Doppler principle to transmit high-frequency electromagnetic waves through the antenna and receive the initial reflected waves to judge the movement of objects within the coverage area and give corresponding electrical signals. Signal. Module size 20*20MM The chip integrates 5.8G microwave circuit, intermediate frequency amplifier circuit and signal processor, with high integration and good production consistency. The module has a built-in 32-bit MCU and a transceiver antenna, which greatly improves the sensing performance of the sensor.

The radar module has a long sensing distance, a wide angle, no dead zone, and the lens and lens aging problems are not affected by temperature, humidity, airflow, dust, noise, brightness and darkness. Widely used in smart lighting, smart door locks, smart security, smart home appliances and other fields.

Hardware Instructions

2.png

Device distribution diagram on the front and back of the module

FR58L4HS-2020L hardware reserves 5pin connection pin header, the pin distance is 2.54mm

The following is a detailed description of each PIN corner name, function, working range, etc.

Pin pin

Functional remarks

remarks

TXD

Burning port tdio

Compatible with UART TX and IO ports

RXD

Burning port TCLK

Compatible with UART RX and IO ports

OUT

output signal

The output signal is high and low level (0V / 5V)

GND

Grounding pin

VCC

Power supply module

LDO is not attached by default, and the power supply voltage is (4.5 ~ 5.5V). If 12V power supply is required, LDO needs to be added, and the power supply VCC is 5V ~ 12V

Technical Parameter

parameter

Small value

Typical value

Large value

Company

remarks

Emission frequency

5725

5800

5875

MHz


input voltage

4.5

5

5.5

V

If 12V power supply is required, LDO shall be added

Output high level


5


V


Output low level


0


V


Working current


33


mA


Sensing distance

0.1

/

70

M

The distance can be adjusted according to demand

Delay Time


2


S

Specific requirements are adjustable

Photosensitive threshold


N/A



Optional, no photosensitive paste by default

Antenna beam angle


100


°


size


20*20


mm


working temperature

-30


85

℃


Storage temperature

-50


125

℃



Description of packaging method

The module is packaged in a blister box and placed in the blister box;

1. Put the blister boxes into the carton according to the stack of 10 boxes;

2. The air raid in the carton is filled with instant noodles to reduce transportation wear;

3. Bubble film is placed on the bottom of the carton to prevent transportation wear;

4. Cover the top layer with bubble wrap and seal with tape to prevent shaking.

3.png

Installation Precautions

1. When installing the antenna, there should be no metal shells or components on the front of the antenna to avoid shielding the signal. Blocks such as plastic or glass are allowed, but the block should not be close to the front of the antenna;

2. Try to avoid directing the radar antenna to large metal equipment or pipes, etc.;

3. When installing multiple radar modules, try to ensure that the antennas of each radar module are parallel to each other, avoid direct irradiation between the antennas, and maintain a distance of more than 1m between modules;

4. The radar sensor should avoid facing the AC drive power supply, and try to stay away from the rectifier bridge of the drive power supply to prevent the power frequency from interfering with the radar signal;

5. It is recommended that the power supply driving capability of the radar module is not less than 50mA, otherwise it may cause the sensor to work

6. When installing, ensure that the installation position of the sensor is firm and stable. The shaking of the radar itself will have a great impact on signal processing.

7. When installing, make sure that there is no object movement or vibration on the back of the radar. Since the radar radio frequency wave is penetrating, the signal on the back of the antenna will also pass through the radar board. If there is an object moving on the back, it will also be collected by the antenna, which will affect the judgment effect. A radome or backplane can be used to reduce the effects of objects behind the radar.

8. When installing, try to ensure that the radar antenna is facing the area to be detected, and the surrounding area of the antenna is open and unobstructed.

国产白丝jk捆绑束缚调教视频 | 冲田杏梨在线观看| 最近免费中文字幕mv在线视频3| 国产精品自在线拍国产| 亚洲中文字幕无码AV| 少妇粉嫩小泬喷水视频www| 一区二区三区无码被窝影院| 自拍偷自拍亚洲精品播放| 国产精品永久久久久久久久久 | 精品女同一区二区三区免费站| 久久亚洲精品无码av| 亚洲加勒比久久88色综合| 国产精品186在线观看在线播放| 久久久亚洲欧洲日产国码aⅴ| 亚洲午夜无码av毛片久久 | 啊轻点灬太粗太长了a片| 国产精品jizz在线观看老狼 | 婷婷综合久久狠狠色99H| 天堂VA蜜桃一区二区三区| 肥臀浪妇太爽了快点再快点| 亚洲国产成人片在线观看| 99香蕉国产精品偷在线观看| 放荡勾人绿茶女(h)| 我被六个男人躁到早上小说| 调教女m屁股撅虐调教| 人妻VA精品VA欧美VA| 国产老熟妇精品观看| 娇妻系列交换27部多p在线观看| 小少爷撅着屁股挨c双龙| 色欲人妻aaaaaaa无码| 欧美交换国产一区内射| 风韵丰满熟妇啪啪区老老熟女百度| 国产成人精品一区二区三区影院| 中国熟妇浓毛hdsex| 亚洲人成网站观看在线播放| 777米奇色狠狠888俺也去乱| 人妻夜夜爽天天爽三区麻豆av网站| 香港三日本8a三级少妇三级99| 精品乱码一区二区三四区视频 | 久久亚洲av成人无码国产电影| 叫大声点浪货腿张开点学生|